Microscan Visionscape Boards
FRAME GRABBER 0740: Supports up to four progressive line scan cameras
DESIGN: PCI 2.2-compatible bus board, 5 V, occupies one half-length slot; 5.5 x 4.2 in. (140 x 107 mm)
VIDEO INPUT: 4 independent channels; simultaneous, asynchronous imaging on all 4 channels; interlaced or progressive scan analog cameras; progressive scan with image sizes up to 2K x 2K; supports shutter, frame-reset, partial-scan cameras as well as double- speed and multiple-speed cameras; supports simultaneous capture by different types of camera on one board; external camera synchronization
VIDEO CONTROL: 4 Hsync ; 4 Vsync ; 4 inputs or outputs for camera control
FRAME GRABBER 0800: Supports one digital CameraLink camera
DESIGN: Universal PCI 2.3-compatible bus board, occupies one half-length slot; 6.6 x 4.2 in. (168 x 107 mm)
VIDEO INPUT: 1 CameraLink Base Level channel as standard; high-resolution area scan; line-scan (up to 16K pixels/line); TDI cameras (time delay and integration); 32 MB SDRAM FIFO buffer; 1 tap 8 to 24 bit/pixel or 2 taps 8 to 12 bit/pixel (configurable, taps can be overlapping or consecutive); pixels can be scaled down to 8 places; 20 to 85 MHz pixel cycle
VIDEO CONTROL: 4 LVDS control outputs; Serial LVDS communication; Asynchronous reset, lighting control (PRIN) & ROI capture; Multiple triggering modes
ENCODER INTERFACE: Selection of 3 RS-422 or TTL inputs on the encoder connection or 4 TTL inputs for 24 V sensor inputs; 2 phases for 1x, 2x, 4x spacing plus index input with direction sensing ; 8 bit distributor
